HP Hitachi Dynamic Link Manager Software - Manual (Page 285)

6. Command Reference
263
Table 6-9: Values of the Audit Log Facility
-s
Executes the command without displaying the message asking for confirmation
of command execution from the user. Specify this parameter if you want to skip
the response to the confirmation message: for example, when you want to execute
the command in a shell script or batch file.
(2) To Display the Format of the Set Operation
-help
Displays the format of the
set
operation.
Example
The following example shows how to display the format of the
set
operation:
Value Corresponding facility value in the /etc/syslog.conf file
user
or
1 user
local0
or
16 local0
local1
or
17 local1
local2
or
18 local2
local3
or
19 local3
local4
or
20 local4
local5
or
21 local5
local6
or
22 local6
local7
or
23 local7
# /usr/DynamicLinkManager/bin/dlnkmgr set -help
set:
Format
dlnkmgr set { -lb on [ -lbtype { rr | exrr | lio | exlio | lbk | exlbk } ]
| -lb off
| -ellv ElogLevel
| -elfs ElogFileSize