HP Hitachi Dynamic Link Manager Software - Manual (Page 303)

6. Command Reference
281
Displayed path information
Table 6-12: Displayed Path Information describes the displayed path information.
The following explains the table headings:
• No summary displayed: The user specifies only the
-path
parameter or
the
-path -item
parameter.
• Summary displayed: The user specifies the
-path -c
parameter.
Table 6-12: Displayed Path Information
Displayed Item Description
No
summary
displayed
Summary
displayed
Paths
Total number of displayed paths, indicated by a decimal (i.e., base 10) number.
OnlinePaths
Number of online paths from within the displayed paths, indicated by a decimal
number. When the value of
Paths
equals the value of
OnlinePaths
, then all the
paths are online. If the value of
OnlinePaths
is less than that of
Paths
, some
paths are offline. In this case, you should check the offline paths and take
appropriate action for any paths that have an error status.