HP Hitachi Dynamic Link Manager Software - Manual (Page 307)

6. Command Reference
285
#
The path information is displayed only when a value is specified for the
-path
-item
parameter.
Table 6-13: Elements of a Path Name
#1
This element is applied when the NPIV option is set to
off
for the
dlmodmset
utility for setting the HDLM execution environment ODM.
#2
This element is applied when the NPIV option is set to
on
for the
dlmodmset
utility for setting the HDLM execution environment ODM.
Element AIX representation Corresponding information
HBA adapter number (example:
08)
#1
HBA adapter number The HBA adapter number, which is
displayed by executing the
lsdev
-Cc disk
command
Bus number (example: 14)
#1 PCI bus number The parent bus number, which is
displayed by executing the
lsdev
-Cc disk
command
Adapter type (example: 00) #2 None Always
00
Adapter number (example: 01) #2
fscsi
number (the xx part of
fscsi
xx)
The
fscsi
number, which is
displayed by executing the
lsdev
-C
command
Target ID (example:
00000000000000E2) Target ID The value of
scsi_id
, which is
displayed by executing the
lsattr
-El
hdisk-name command
Host LU number(example: 0001) Logical unit ID or LUN The value of
lun_id
, which is
displayed by executing the lsattr -El
hdisk-name command