HP Hitachi Dynamic Link Manager Software - Manual (Page 406)

8. Messages
384
Details
All the paths that path health checking examined are fine.
aa...aa: Start or stop
Action
None.
KAPL04045-I
HDLM SNMP TRAP was sent. Trap ID =
aa...aa
, IP Address =
bb...bb
,
Port Number=
cc...cc
, Community =
dd...dd
, Trap Data =
ee...ee
Details
SNMP TRAP was sent.
aa...aa: Trap ID
bb...bb: Destination IP address of the trap
cc...cc: Destination port number of the trap
dd...dd: Community name given to the trap
ee...ee: Transmission data
Action
None.
KAPL04046-E
An attempt to connect to the HDLM alert driver has failed. RC =
aa...aa
. The HDLM manager will now terminate.
Details
An attempt to connect to the HDLM alert driver during HDLM manager startup
has failed. The HDLM manager will now terminate.
aa...aa: OS error code (decimal number)
Action
See 3.5 Installing HDLM, and then complete the installation. If the same error
continues to occur even after the procedure is performed, execute the
DLMgetras
utility for collecting HDLM error information, and then contact your HDLM
vendor or maintenance company if there is a maintenance contract for HDLM.
For details on the
DLMgetras
utility, see 7.2 DLMgetras Utility for Collecting
HDLM Error Information.