Document Outline

• 1 Product Description
  • Product Description
    • Operating System Support
    • Management Tools
    • Features
    • High Availability
    • Scalable Storage Capacity
    • LED Status Monitoring
    • EMS Hardware Event Monitoring (HP-UX Only)
  • Disk Enclosure Components
    • Operation Features
    • Disk Enclosure SC10 Modules
  • Array Controller Enclosure Components
    • Front Cover
    • Controller Modules
    • Controller Fan Modules
    • Power Supply Modules
    • Power Supply Fan Module
    • Battery Backup Unit
  • Disk Array High Availability Features
    • RAID Technology
    • Disk Mirroring
    • Data Parity
    • Data Striping
    • RAID Levels
    • RAID Level Comparisons
    • Global Hot Spare Disks
    • Primary and Alternate I/O Paths
  • Capacity Management Features
    • LUNs
    • Disk Groups
    • Disk Array Caching
    • Dynamic Capacity Expansion
• 2 Topology and Array Planning
  • Overview
  • Array Design Considerations
    • Array Hardware Configuration
    • RAID, LUNs, and Global Hot Spares
    • High Availability
    • Performance
    • Storage Capacity
    • Expanding Storage Capacity
  • Recommended Disk Array Configurations
    • Configuration Considerations
    • One Disk Enclosure Configuration
    • Two Disk Enclosure Configurations
    • Three Disk Enclosure Configurations
    • Four Disk Enclosure Configurations
    • Five Disk Enclosure Configurations
    • Six Disk Enclosure Configurations
    • Total Disk Array Capacity
  • For high-availability, one disk per SCSI channel is used as a global hot spare.
  • Topologies for HP-UX
    • Basic Topology
    • Single-System Distance Topology
    • High Availability Topology
    • High Availability, Distance, and Capacity Topology
    • Campus Topology
    • Performance Topology with Switches
  • Topologies for Windows NT and Windows 2000
    • Non-High Availability Topologies
    • High Availability Topologies
• 3 Installation
  • Overview
  • Host System Requirements
    • HP-UX
    • Windows NT and Windows 2000
  • Site Requirements
    • Environmental Requirements
    • Electrical Requirements
  • Power Distribution Units (PDU/PDRU)
    • Installing PDUs
    • Recommended UPS Models
  • Installing the Disk Array FC60
  • Installing the Disk Enclosures
    • Step 1: Collect Required Tools
    • Step 2: Unpack the Product
    • Step 3: Install Mounting Rails
    • Step 4: Install the Disk Enclosure
    • Step 5: Install Disks and Fillers
    • Moving a Disk Enclosure from One Disk Array to Another
  • Installing the Controller
    • Step 1: Gather Required Tools
    • Step 2: Unpack the Product
    • Step 3: Install Mounting Rails
    • Step 4: Install the Controller Enclosure
  • Configuration Switches
    • Disk Enclosure (Tray) ID Switch
    • Disk Enclosure DIP Switch
    • Fibre Channel Host ID Address Setting
  • Attaching Power Cords
  • Attaching SCSI Cables and Configuring the Disk Enclosure Switches
    • Full-Bus Cabling and Switch Configuration
    • Split-Bus Switch and Cabling Configurations
  • Connecting the Fibre Channel Cables
  • Applying Power to the Disk Array
  • Verifying Disk Array Connection
    • On Windows NT and Windows 2000
    • On HP-UX
    • Interpreting Hardware Paths
  • Installing the Disk Array FC60 Software (HP-UX Only)
    • System Requirements
    • Verifying the Operating System
    • Installing the Disk Array FC60 Software
    • Downgrading the Disk Array Firmware for HP-UX 11.11 Hosts
  • Configuring the Disk Array
    • HP-UX
    • Windows NT and Windows 2000
  • Using the Disk Array FC60 as a Boot Device (HP-UX Only)
  • Solving Common Installation Problems
  • Adding Disk Enclosures to Increase Capacity
    • General Rules for Adding Disk Enclosures to the Disk Array
    • Step 1. Plan the Expanded Configuration
    • Step 2. Backup All Disk Array Data
    • Step 3. Prepare the Disk Array for Shut Down
    • Step 4. Add the New Disk Enclosures
    • Step 5. Completing the Expansion
    • Capacity Expansion Example
• 4 Managing the Disk Array on HP-UX
  • Tools for Managing the Disk Array FC60
    • System Administration Manager (SAM)
    • Array Manager 60
    • STM
  • Installing the Array Manager 60 Software
    • AM60Srvr Daemon
    • Running Array Manager 60
  • Managing Disk Array Capacity
    • Configuring LUNs
    • Selecting Disks for a LUN
    • Assigning LUN Ownership
    • Selecting a RAID Level
    • Global Hot Spares
    • Setting Stripe Segment Size
    • Evaluating Performance Impact
  • Adding Capacity to the Disk Array
    • Adding More Disk Modules
    • Adding Additional Disk Enclosures
    • Replacing Disk Modules with Higher Capacity Modules
  • Upgrading Controller Cache to 512 Mbytes
  • Managing the Disk Array Using SAM
    • Checking Disk Array Status
    • Assigning an Alias to the Disk Array
    • Locating Disk Modules
    • Binding a LUN
    • Unbinding a LUN
    • Replacing a LUN
    • Adding a Global Hot Spare
    • Removing a Global Hot Spare
  • Managing the Disk Array Using Array Manager 60
    • Command Syntax Conventions
    • Array Manager 60 man pages
    • Quick Help
    • Selecting a Disk Array and Its Components
    • Preparing to Manage the Disk Array
    • Checking Disk Array Status
    • Managing LUNs
    • Managing Global Hot Spares
    • Managing Disk Array Configuration
    • Managing the Universal Transport Mechanism (UTM)
    • Managing Cache Parameters
    • Performing Disk Array Maintenance
    • Managing Disk Array Logs
    • Upgrading Disk Firmware
  • Managing the Disk Array Using STM
    • Checking Disk Array Status Information
    • Binding a LUN
    • Unbinding a LUN
    • Adding a Global Hot Spare
    • Removing a Global Hot Spare
    • Locating Disk Modules
  • Status Conditions and Sense Code Information
    • LUN Status Conditions
    • Disk Status Conditions
    • Component Status Conditions
    • FRU Codes
    • SCSI Sense Codes
• 5 HP-UX Diagnostic Tools
  • Overview
  • Support Tools Manager
    • STM User Interfaces
    • STM Tools
    • Using the STM Information Tool
    • Interpreting the Information Tool Information Log
    • Interpreting the Information Tool Activity Log
    • Using the STM Expert Tool
• 6 Troubleshooting
  • Introduction
    • About Field Replaceable Units (FRUs)
    • HP-UX Troubleshooting Tools
    • Windows NT and Windows 2000 Troubleshooting Tools
    • EMS Hardware Event Monitoring (HP-UX Only)
  • Disk Array Installation/Troubleshooting Checklist
  • Power-Up Troubleshooting
  • Controller Enclosure Troubleshooting
    • Introduction
    • Controller Enclosure LEDs
    • Master Troubleshooting Table
  • SureStore E Disk System SC10 Troubleshooting
    • Disk Enclosure LEDs
    • Losing LUN 0
    • Interpreting Component Status Values (HP-UX Only)
    • Isolating Causes
• 7 Removal and Replacement
  • Overview
  • Disk Enclosure Modules
    • Disk Module or Filler Module
    • Disk Enclosure Fan Module
    • Disk Enclosure Power Supply Module
  • Controller Enclosure Modules
    • Front Cover Removal/Replacement
    • Controller Fan Module
    • Battery Backup Unit (BBU) Removal/Replacement
    • Power Supply Fan Module Removal/Replacement
    • Power Supply Module Removal/Replacement
    • SCSI Cables
• 8 Reference / Legal / Regulatory
  • System Requirements
    • Host Systems
    • Supported Operating Systems
    • Fibre Channel Host Adapters
  • Models and Options
    • A5277A/AZ Controller Enclosure Models and Options
    • A5294A/AZ Disk Enclosure SC10 Models and Options
    • Disk Array FC60 Upgrade and Add-On Products
  • PDU/PDRU Products
  • Replaceable Parts
  • A5277A/AZ Controller Enclosure Specifications
    • Dimensions:
    • Weight:
    • AC Power:
    • Heat Output:
    • Environmental Specifications
    • Acoustics
  • A5294A/AZ Disk Enclosure Specifications
    • Dimensions:
    • Weight:
    • AC Power:
    • DC Power Output:
    • Heat Output:
    • Environmental Specifications
    • Acoustics
  • Warranty and License Information
    • Hewlett-Packard Hardware Limited Warranty
    • Software Product Limited Warranty
    • Limitation of Warranty
    • Hewlett-Packard Software License Terms
  • Regulatory Compliance
    • Safety Certifications:
    • EMC Compliance
  • FCC Statements (USA Only)
    • IEC Statement (Worldwide)
    • CSA Statement (For Canada Only)
    • VCCI Statement (Japan)
    • Harmonics Conformance (Japan)
    • Class A Warning Statement (Taiwan)
    • Spécification ATI Classe A (France Seulement)
    • Product Noise Declaration (For Germany Only)
    • Geräuschemission (For Germany Only)
    • Declaration of Conformity