HP ProLiant ML350e Gen8 Server - Manual (Page 12)

Component identification 12
Item Description
28 Fan connector 2
29 Front panel connector
30 Front panel connector
31 Fan connector 1
32 External thermal cable connector
33 Redundant power supply connector
34 Cache module connector
35 TPM connector
36 NMI header
System maintenance switch
The system maintenance switch (SW2) is a twelve-position switch that is used for system configuration.
Position Description Function
S1 iLO security
override
Off = No function.
On = Override enabled.
S2 Configuration
lock
Off = System configuration can be
changed.
On = System configuration is locked.
S5 Password disable Off = Power-on password enabled.
On = Power-on password disabled.
S6 Reset
configuration Off = No function
On = ROM reads the system
configuration as invalid.
S3, S4,
S7-S12 — Reserved
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase all
system configuration settings from both CMOS and NVRAM.
CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to
properly configure the server or data loss could occur.