HP ProLiant ML350e Gen8 Server - Manual (Page 21)

Component identification 21
Item Description Connector
identifier
2 Drive bay 3 drive backplane connector P5H
3
Drive bay 2 RPS backplane connector P5
4 Drive bay 3 RPS backplane connector P5
5 Power good connector J11
6 Power good connector J11
7
Processor 2 RPS backplane connector P3
8 Processor 2 connector P3M
T-10/T-15 Torx screwdriver
The server includes a T-10/T-15 Torx screwdriver located on the rear panel. Use the screwdriver to loosen
screws or thumbscrews, as needed, during procedures.