Remove a component drive cage blank – HP ProLiant ML350e Gen8 Server User Manual
Page 36
Advertising
Operations 36
7.
Remove the DVD drive.
Remove a component drive cage blank
To remove the component:
1.
Do one of the following:
o
For tower models, open and remove the bezel.
o
For rack models, do the following:
i.
If installed, remove the security bezel (on page
ii.
Remove the access panel. ("
" on page
iii.
Release thumbscrews and remove the rack bezel. ("
" on page
2.
Remove the component drive cage blank.
WARNING:
To reduce the risk of personal injury from an electrical hazard, do not remove more
than one drive cage at a time.
Advertising