HP ProLiant ML350e Gen8 Server User Manual
Page 48
Hardware options installation 48
IMPORTANT:
If installing a processor with a faster speed, update the system ROM before
installing the processor.
To install a processor:
1.
Do one of the following:
o
For tower models, open and remove the bezel ("
" on page
o
For rack models, if installed, remove the security bezel (on page
2.
Power down the server (on page
3.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
4.
For tower models, do the following:
a.
Place the server on a flat, level surface with the access panel facing up.
b.
Remove the access panel (on page
5.
For rack models, do the following:
a.
Extend the server from the rack (on page
b.
Remove the access panel (on page
6.
Remove the PCI air baffle (on page
), if installed.
7.
Remove the system air baffle (on page
8.
Open each of the processor locking levers in the order indicated, and then open the processor retaining
bracket.