HP ProLiant DL385 G6 Server User Manual
Page 33
Advertising
Setup 33
18
iLO 2 connector
—
19
NIC 3 connector
—
20
NIC 4 connector
—
WARNING:
To reduce the risk of electric shock, fire, or damage to the equipment, do not plug
telephone or telecommunications connectors into RJ-45 connectors.
3.
Connect the power cord to the rear of the server.
4.
Install power cord anchors.
5.
Secure cables to the cable management arm.
IMPORTANT:
When using cable management arm components, be sure to leave enough slack
in each of the cables to prevent damage to the cables when the server is extended from the
rack.
6.
Connect the power cord to the AC power source.
Advertising