HP ProLiant DL385 G6 Server User Manual
Page 9
Component identification 9
Systems Insight Display LEDs and internal health LED
combinations
When the internal health LED on the front panel illuminates either amber or red, the server is experiencing
a health event. Combinations of illuminated system LEDs and the internal health LED indicate system
status.
Systems Insight Display
LED and color
Internal health
LED color
Status
Processor (amber)
Red
One or more of the following conditions may exist:
•
Processor in socket X has failed.
•
Processor X is not installed in the socket.
•
Processor X is unsupported.
•
ROM detects a failed processor during POST
Amber
Processor in socket X is in a pre-failure condition.
DIMM (amber)
Red
DIMM in slot X has failed.
Amber
DIMM in slot X is in a pre-failure condition.
DIMM (amber)
Red
One or more DIMMs have failed. Test each bank of
DIMMs by removing all other DIMMs. Isolate the failed
DIMM by replacing each DIMM in a bank with a known
working DIMM.
Overtemperature (amber)
Amber
The Health Driver has detected a cautionary temperature
level.
Red
The server has detected a hardware critical temperature
level.
Fan (amber)
Amber
One fan is failed or removed.
Red
Two or more fans have failed or are missing.
Power supply (amber)
Red
Only one power supply installed and power supply in
standby.
•
Power supply fault
•
System board fault
Power supply (amber)
Amber
Redundant power supply installed and only one power
supply is functional.
•
AC power cord not plugged into redundant power
supply
•
Redundant power supply fault
Power supply (amber)
Amber
Power supply mismatch at POST or power supply mismatch
through hot add.