Installing a half-length expansion board – HP ProLiant DL385 G6 Server User Manual
Page 49
Advertising
Hardware options installation 49
o
To remove slot covers 2 and 3, lift up on the latch, remove the latch, and then remove the cover.
o
To remove slot covers 5 and 6, push down on the latch, rotate the latch down, and then remove
the cover.
Installing a half-length expansion board
1.
Power down the server (on page
2.
Extend the server from the rack (on page
3.
Remove the access panel (on page
4.
Remove the PCI riser cage (on page
5.
Remove the expansion slot cover ("
Removing expansion slot covers
6.
Install the expansion board.
7.
Connect any required internal or external cables to the expansion board. See the documentation that
ships with the expansion board.
Advertising