Hot-plug sas hard drive options, Installing a hot-plug sas hard drive – HP ProLiant DL385 G6 Server User Manual
Page 46
Hardware options installation 46
7.
Install the DIMM.
8.
Install the air baffle ("
9.
Install the PCI riser cage (on page
10.
Install the access panel (on page
11.
Install the server into the rack.
12.
Power up the server (on page
For more information about LEDs and troubleshooting failed DIMMs, see "Systems Insight Display LEDs
and internal health LED combinations (on page
Hot-plug SAS hard drive options
When adding hard drives to the server, observe the following general guidelines:
•
The system automatically sets all device numbers.
•
If only one hard drive is used, install it in the bay with the lowest device number ("
•
Drives should be the same capacity to provide the greatest storage space efficiency when drives are
grouped together into the same drive array.
Installing a hot-plug SAS hard drive
1.
Remove the SAS hard drive blank.