Installing a full-length expansion board – HP ProLiant DL385 G6 Server User Manual
Page 50
Advertising
Hardware options installation 50
8.
Install the PCI riser cage (on page
9.
Install the access panel (on page
Installing a full-length expansion board
1.
Power down the server (on page
2.
Extend the server from the rack (on page
3.
Remove the access panel (on page
4.
Remove the PCI riser cage (on page
5.
Remove the expansion slot cover ("
Removing expansion slot covers
6.
Open the full-length expansion board retainer.
7.
Install the expansion board.
8.
Close the slot cover latch.
9.
Close the full-length expansion board retainer.
Advertising