Using the hood controls, Care and cleaning of the vent hood – GE JVE40DTBB User Manual

Page 4

Advertising
background image

4

49-80622-4

HI

OFF

LO

FAN

LIGHT

OFF

ON

Using the hood controls.

Throughout this manual, features and appearance may vary from your model.

FAN Control

Press the rocker switch at the top to turn the fan on

HI

and at the bottom to turn it on LOW . The center

position is OFF .

Continuous use of the fan system while cooking helps

keep the kitchen comfortable and less humid . It also

reduces cooking odors and soiling moisture that create a

frequent need for cleaning .

LIGHT Control

Press the rocker switch at the bottom to turn the light ON

while cooking . Press the rocker switch at the top to turn

the light OFF .

Rocker Switch Controls

Reusable Metal Grease Filters

The hood has 2 metal reusable grease

filters .
The metal filters trap grease released

by foods on the cooktop . They also help

prevent flaming foods on the cooktop

from damaging the inside of the hood .
For this reason, the filters must ALWAYS

be in place when the hood is used . The

grease filters should be cleaned once a

month, or as needed .
To remove, press the filter locks back

and pull the filters down and out .
To replace, insert the rear filter tabs

in the frame slots at the back of the

opening . Push the filters up and lock

them into place .

To clean the grease filters, soak them

and then swish them around in hot

water and detergent . Don’t use ammonia

or ammonia products because they will

darken the metal . Do not use abrasives

or oven cleaners . Light brushing can be

used to remove embedded dirt . Rinse,

shake and let them dry before replacing .

They may also be cleaned in an

automatic dishwasher.
NOTE:
Before cleaning, make sure the

charcoal filters, if present, are unclipped

and removed. See the Charcoal Filters

section.

If it ever becomes necessary to replace

the metal grease filters, they may be

ordered from your GE supplier.

Filter locks

Care and cleaning of the vent hood.

Be sure electrical power is off and all surfaces are cool before cleaning or servicing any part of the vent hood.

Advertising
This manual is related to the following products: