GE JAS02SNSS - Manual (Page 26)

Painted Surfaces
(on some models)
Glass Window
(on some models)
Painted surfaces include the sides of the range
and the sides of the door trim.
To clean the painted surfaces, use a hot, damp
cloth with a mild detergent suitable for these
surfaces. Use a clean, hot, damp cloth to
remove soap. Dry with a dry, clean cloth.
Do not use steel-wool pads, commercial oven
cleaners, cleansing powders, or other abrasive
cleaners. They will damage the surface.
To clean the outside glass finish, use a glass
cleaner. Rinse and polish with a dry cloth.
Care and cleaning of the range.
26
Oven Vent
On glass cooktop models, the oven vent is
located behind the right-rear surface unit.
On coil cooktop models, the oven is vented
through an opening under the right-rear
surface unit.
Never cover the opening with aluminum foil
or any other material.
Do not use a steel wool pad; it will scratch the
surface.
To clean the stainless steel surface, use warm,
sudsy water or a stainless steel cleaner or
polish. Always wipe the surface in the direction
of the grain. Follow the cleaner instructions for
cleaning the stainless steel surface.
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the
location of a dealer nearest you, please call our
toll-free number:
National Parts Center
1.800.626.2002
GEAppliances.com
Stainless Steel Surfaces
(on some models)
26