GE ZET2SMSS - Manual (Page 37)

37
Care and Cleaning
Wall Oven
To clean
the door
Inside of the door:
• Because the area inside the gasket is cleaned
during the self-clean cycle, you do not need
to clean this by hand. Any soap left on the
liner causes additional stains when the oven is
heated, so be sure to rinse thoroughly.
• The area outside the gasket can be cleaned with
a soap-filled scouring pad.
• 'RQRWUXERUFOHDQWKHGRRUJDVNHW³
the fiberglass material of the gasket has an
extremely low resistance to abrasion. An intact
and well-fitting oven door gasket is essential
for energy-efficient oven operation and
good baking results. If you notice the gasket
becoming worn, frayed or damaged in
any way or if it has become displaced on
the oven, you should have it replaced.
Outside of the door:
• Depending on your model, see the Stainless steel
surfaces section or the Painted surfaces section.
Painted surfaces include the door, top
of the control panel and the drawer front.
Clean these with soap and water or a vinegar
and water solution. Do not use commercial oven cleaners, cleaning
powders, steel wool or harsh abrasives on any
painted surface. Painted
surfaces
(on some
models)
Do not use a steel-wool pad; it will scratch the
surface.
To clean the stainless steel surface, use
warm sudsy water or a stainless steel cleaner or
polish. Always wipe the surface in the direction
of the grain. Follow the cleaner instructions for
cleaning the stainless steel surface.
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the location
of a dealer nearest you, please call
our toll-free number, 800.626.2002 or visit
monogram.com.
Stainless steel
surfaces (on
some models)