Ag Leader PFadvantage Advanced Light Bar Operators Manual - Manual (Page 22)

General Operation Light Bar
Ag Leader Technology
C-Clamp Pattern This pattern may be used in a field you want to work in a parallel A-B
pattern. The ends of the fields are sprayed as headlands so the parallel
A-B passes are made with minimal overlap in the headland zones.
Pattern: Set to None
Headland pattern: Set to C-Clamp
NOTE: Before working in a new field, you should reset the
system to clear previous field information.
IMPORTANT: In order to use the UP or DOWN ARROW,
the Lightbar pass number must be displayed on the screen of
the PF Monitor.
Figure 13. Straight Parallel pattern with C-clamp headland.
February 2003 Rev.3 3000135 18