Pf series monitors setup for lightbar, Gps setup, Edit – Ag Leader PFadvantage Advanced Light Bar Operators Manual User Manual
Page 36: Exit, Figure 26, Light bar, Ag leader technology
Advertising

PF3000 or PF3000 Pro Setup for Light Bar
Light Bar
Ag Leader Technology
PF Series monitors
Setup for Lightbar
1. Power up the PF monitor.
2. Press MENU key until SETUP is displayed and select SETUP.
3. Press the left or right arrow keys to select GPS.
4. At the GPS Setup screen, use the up or down arrow key to scroll
down until Light Bar is highlighted and press EDIT key. (Figure
26)
GPS SETUP
NEMA MESSAGES
GPS/PORT CONFIGURATION
BEACON DIFFERENTIAL
SATELLITE DIFFERENTIAL
LIGHT BAR
GUIDANCE
EDIT
EXIT
Figure 26.
March 2001
Rev.1 3000135
30
Advertising
This manual is related to the following products: