Ag Leader Yield Monitor 2000 Operators Manual - Manual (Page 5)

Yield Monitor 2000
Setup Overview
Ag Leader Technology
June 1997
2-1
Important Notices The yield monitor must be set up before field operation, but before you begin
the setup procedures, read the following notices:
•
You can upgrade the Yield Monitor 2000 console by replacing a
computer chip inside the box. To receive the free upgrade chip, you
must send in the registration form at the beginning of the operator’s
manual.
•
If you plan to make yield maps on your own computer, you will need to
use Precision Map 2000 (or another mapping program that can process
memory cards from the Yield Monitor 2000) to process the memory
cards when they get full. You can also purchase memory cards from Ag
Leader Technology. Precision Map 2000 comes with your Yield
Monitor 2000 kit.
Section Contents The following subjects are detailed in this section:
Subject Page
General Description 2-2
Before Setup 2-9
Setting Date and Time 2-10
Logging Settings 2-11
Settings Under SETUP Key 2-14
Setting Swath 2-17
Speed Setting 2-19
Setting Moisture 2-21
Setting Dry % Moisture, Dry Lbs/Bu 2-22
Setting Initial Calibration Numbers 2-23
Starting, Naming Fields/Loads 2-25
Setting Stop Height 2-31
Copying Memory to Backup 2-32
* * *