Ag Leader PF3000 Harvest & Application Operators Manual - Manual (Page 121)

PF3000 Calibrating Temperature
Ag Leader Technology (Harvest Mode)
April 2002 3-5
Introduction The moisture sensor contains a temperature sensor, which measures the
grain temperature for use in adjusting the measured grain moisture. You
must have the moisture sensor installed in the combine before you can
calibrate temperature.
Temperature To view the temperature calibration screen press the:
Calibration
Screen
MENU key
CAL key
TEMP key
Example of temperature calibration screen:
Calibration TEMPERATURE CALIBRATION
Procedure
ACTUAL TEMPERATURE :
68
deg F
MEASURED TEMPERATURE: 78 deg F
CAUTION: CALIBRATE BEFORE BUT
NOT DURING HARVEST SEASON
PERFORM
CAL
CAL
MOISTURE
EXIT
ACCEPT CANCEL