Ag Leader PF3000 Harvest & Application Operators Manual - Manual (Page 141)

PF3000 Operation Overview
Ag Leader Technology
April 2002 4-1
Important Notices The PF3000 must be properly setup and calibrated. Carefully read and
follow the directions in the setup and calibration section before using the
PF3000.
Section Contents This section contains instructions for the following items. The operating
modes that the instructions pertain to are also listed.
Item Operating Mode Page
Fields and Loads All 4-2
On Screen Map All 4-4
Area Counting All 4-6
Memory All 4-10
Marking All 4-12
Logging Map Data to a Card All 4-14
Using a GPS Receiver All 4-18
Using a Radar Gun All 4-19
Diagnostic All 4-21
Display Items Harvest 4-24
Summary Harvest 4-28
Moisture Setting Harvest 4-32
Swath Setting Harvest 4-33
Grain Type Harvest 4-34
Load Settings Harvest 4-35
Site Verification Site Verification 4-37
Application Rate – Monitor and Control Application Rate 4-39
Display Items Application Rate 4-44
Printing Field/Load Summary Harvest 4-47
Checking Data Accuracy-End of Season Harvest 4-62
Updating Operating Program All 4-66
Navigate All 4-69
Boundary All 4-74
Gridding Site Verification 4-77
***