Document Outline

• General
  • Introduction and Company Profile
  • ABOUT US
  • INNOVATION
  • COMPATIBILITY
  • QUALITY AND SUPPORT
  • WE WANT TO HEAR FROM YOU!
  • About the Display
  • SERVICE
  • SYSTEM USES
  • SYSTEM FEATURES
  • DATA CARD USAGE
  • COLOR TOUCH SCREEN
  • CAN-BUS TECHNOLOGY
  • TECHNICAL SPECIFICATIONS
  • SYSTEM UPGRADES
  • Conventions Used in this Manual
    • Cautions and Warnings
    • Cross-References and Web Links
    • Viewing this Manual Online
    • How to Find Information You’re Looking For
    • Display Hardware
    • Installation Instructions
    • Mounting the Display
    • Mounting Components
    • Fuse Installation and Replacement
    • Screen Icon Conventions
• Setup
  • System Functionality
  • Home Screen
  • Setup Screen
  • Management
    • Grower Management Tab
    • Importing an .MSF File
    • Season Management Tab
    • Field Management Tab
    • Import and Export Boundaries
      • Boundary Import
      • Boundary Export
  • Console
    • General Tab
    • Memory Tab
    • Features Tab
    • Advanced Tab
    • Module Firmware Management
  • Field Notes
  • Start Field Operation
    • Run Time Environment: Map Screen
    • Title Bar
    • Task Bar Buttons
    • Map Screen Icons
    • Map Screen Status Items
  • Edit Legend
  • Create a Boundary
    • Start Boundary
    • Pause Boundary
    • View Boundary
    • View Map Markers
  • Summary
    • Select Summary
  • Diagnostics
    • Device Information
    • Memory
    • Display
• GPS
  • GPS General Tab
  • OmniSTAR Settings
  • Serial Port Settings
  • OmniSTAR Settings — GPS 2500
  • GPS Port Setup - GPS 2500
  • GPS Diagnostics
    • GPS Information - First Screen
    • GPS Information - Second Screen
    • GPS Information - Third Screen
    • OnTrac2 Information
    • ParaDyme Information
    • NTRIP Information
• Guidance
  • GPS Guidance Tab
    • Guidance Control
    • Pattern Files
    • Lightbar Settings
  • Guidance Functions
    • On-Screen Lightbar
    • Guidance Screen
    • New AB Pattern
    • SmartPath
      • Creating a SmartPath Pattern
  • SmartPathNotes:
    • Select a Previous SmartPath Pass
    • Create an AB Line Within a SmartPath Pass
    • Choose Existing Lines Within SmartPath
    • SmartPath Guidance Options
    • Save Pattern
    • Reset Pattern
    • Load Pattern
    • About Guidance Patterns
    • A+ Pattern
    • Pivot
    • Adaptive Curve
    • Identical Curve
    • Guidance Options
    • Pause
    • Remark A
    • Shift
    • Adaptive Curve
    • Nudge
  • OnTrac2
    • OnTrac2 Setup Tasks
    • Vehicle Configuration
    • Edit Vehicle Settings
    • OnTrac2 Tools Tab
    • Calibrating OnTrac2
    • OnTrac2 Steering Diagnostics
      • Steering
      • Drive Unit
      • Status
    • Adjust Disengage Sensitivity
    • Minimum Output
    • OnTrac2 Advanced Tab
      • Vehicle Database
      • Log Files
    • OnTrac2 Run Time Environment
    • Steering Adjustment
    • Tuning
    • How the OnTrac2 System works
      • Steering
      • Heading
      • Cross Track
• Tillage
  • Run Time Environment: Map Screen
  • Create a Tillage Configuration
    • Create a Configuration
      • Configuration Notes
  • GPS Offsets
    • Antenna Offsets
    • Hitch Tab Settings
  • Implement Offsets
• Planting
  • Run Time Environment: Map Screen
    • Map Screen: Zoom to Extent
    • Map Screen: Zoom Detail
    • Planting Map Screen Items
  • Planting Setup Tabs
  • Create a Planting Configuration
  • Configuration Settings
    • Configuration Settings: Equipment Configuration
      • Equipment Configuration Settings - SeedCommand
    • Speed Input Settings
    • Calibrate Distance
    • Auxiliary Input Settings (Switch Mapping)
      • Add Auxiliary Input Settings
    • AutoSwath
    • AutoSwath Notes
    • Fixing Overplanting and Underplanting in AutoSwath
  • Vehicle Tab
    • GPS Offsets
    • Antenna Tab
    • Hitch Tab
  • Implement Tab
    • Implement Offsets
    • Section Offsets
  • Controller Tab
    • Controller Settings (SeedCommand)
  • Product Tab
    • Product Options
    • Add Product
    • Import Product
    • Product Settings
  • Planting: SeedCommand™ Machine-Specific Setup
    • Map Screen: Zoom to Extent
    • Map Screen: Zoom Detail
    • Planting Map Screen Items
  • Run Time Environment: Rate Screen
    • Planting Rate Control Configuration Screen
    • Loading Prescriptions
  • Row Shutoff
    • Row Shutoff Configuration
    • Row Shutoff Look-Ahead Numbers
    • Checking AutoSwath Performance for Row Shutoff
  • Hydraulic Seed Rate Control
    • Hydraulic Seed Rate Control Configuration
    • Controller Settings for Hydraulic Seed Rate Motor Drives
    • Channel Tabs
      • Control Valve Settings - PWM
      • Control Valve Settings - Servo
    • Auxiliary Tab
    • Hydraulic Seed Controller Settings for Specific Planter
      • John Deere Planters
      • White Planters
      • Case IH Planters
    • Hydraulic Seed Meter Calibration Numbers
  • Stepper Seed Rate Control
    • Stepper Seed Rate Control Configuration
    • Controller Settings for Stepper Seed Rate Motor Drives
    • Channel Tabs
    • Auxiliary Tab
    • Gear Ratio Calculations for Seed Rate Motors
    • Gear Ratio Drawing - For Single Motor Drive
    • Gear Ratio Drawing - For Multiple Drive Combinations
    • Seed Ratio Calculation Example Procedure
    • Gear Ratio Drawing - For John Deere Pro-Shaft™ Drives
    • Priming Seed Rate Meters
    • Calibrating Seed Rate Meters
  • Troubleshooting
    • Zero Flow Offset Variation
      • a. Turn the Master Switch off. Enter a manual ground speed and enter a new region.
      • b. From the Run screen, open the product application rate window, and highlight the appropriate product. Select Manual control mode.
      • c. Switch the Master Switch on.
      • d. Press the up button one time. Now press the down button one time. If the drive is not turning, the Zero Flow Offset is likely to be too low.
      • a. Turn the Master Switch off. Enter a manual ground speed and create a new region.
      • b. Increase Zero Flow Offset by 2.
      • c. From the Run screen, open the product application rate window, and highlight the appropriate product. Select Manual control mode.
      • d. Switch the Master Switch on.
      • e. Press the up button one time. Now press the down button one time. The drive should be turning. If not, repeat this procedure starting with Step 2.
    • Hydraulic Seed Control: Zero Flow Offset Variation
      • a. Turn the Master Switch off. Enter a manual ground speed and create a new region.
      • b. From the Run screen, open the product application rate window, and highlight the appropriate product. Select Manual control mode.
      • c. Switch the Master Switch on.
      • d. Press the up button one time. Now press the down button three times. If the drive is still turning, the zero flow offset is likely to be too high.
      • a. Turn the Master Switch off. Enter a manual ground speed and enter a new region.
      • b. Reduce Zero Flow Offset by 2.
      • c. From the Run screen, open the product application rate window, and highlight the appropriate product. Select Manual control mode.
      • d. Switch the Master Switch on.
      • e. Press the up button one time. Now press the down button three times. The drive should not be turning. If it is, repeat this procedure, starting with step 2.
    • Stepper Seed Control Meter Alarms
  • Diagnostics
    • Clutch Diagnostics (for Row Shutoff)
    • Input Diagnostics
• Application
  • Run Time Environment: Map Screen
    • Map Screen - Zoom to Extent
    • Map Screen: Zoom Detail
    • Application Map Screen Items
  • Application Setup Tabs
  • Create an Application Configuration
  • Configuration Settings
    • Configuration Settings: Equipment Configuration
      • Configuration Settings - Area Logging
      • Edit Configuration Settings - Area Logging
    • Configuration Settings - DirectCommand
      • Configuration Settings - DirectCommand
    • Speed Input Settings
    • Calibrate Distance
    • Auxiliary Input Settings
      • Add Auxiliary Input Settings
      • Fence Row Nozzle Indicators
    • AutoSwath
    • AutoSwath Notes
  • Vehicle Tab
    • GPS Offsets
    • Antenna Tab
    • Mount Tab
    • Hitch Tab
  • Implement Tab
    • Implement Offsets
    • Section Offsets
  • Controller Tab
    • Controller Settings (DirectCommand)
  • Product Tab
    • Product Screen
    • Product Settings
    • Product Options
    • Tank Mix Setup
    • Dry (Granular) Fertilizer Blend Setup
  • Miscellaneous Items
    • Fertilizer Default Product Settings
    • John Deere Specific Instructions
  • MASTER SWITCH INPUT
  • MASTER SWITCH USAGE
  • TARGET RATE
  • DATA COLLECTION
  • AUTOSWATH BOOM SECTION CONTROL
  • SPRAY STAR APPLICATION RATE
  • SPRAY STAR RINSE CYCLE
  • Control Valve Settings
    • Liquid Product Control Valve Configuration
    • Servo Control Valve Settings (By Manufacturer)
    • Control Valve Settings for Self-Propelled Sprayers
    • Liquid Servo Settings Description
    • Liquid PWM Control Valve Settings Description
    • Spinner Spreader Servo Settings Description
    • Spinner Spreader PWM Control Valve Settings Description
    • Spinner Speed PWM Valve Settings Description
    • Dickey John NH3 Conversions
      • Conversion Formulas
  • Application: DirectCommand™ Machine- Specific Setup
  • Map Screen: Zoom to Extent
  • Map Screen: Zoom Detail
    • Application Map Screen Items
  • Run Time Environment: Rate Screen
    • Target Rate
    • Rate Screen: Container Level
    • Tank Fill
    • Tank Empty
    • Tank Partial Fill
      • Adjust Container Amount
    • Tank Alarms
      • Container Alarm Screen
    • Rate Screen: Liquid Flow/Pressure
    • Rate Screen: Spinner Spreader Settings
    • Spinner Spreader Product Settings
    • Spreader Control
    • Application Rate Control Configuration Screen
    • Loading Prescriptions
  • Shape File Conversion
  • Liquid Application Control
    • Liquid Application Control Configuration
    • Liquid Application Controller Settings
      • Controller Settings - PWM
      • Controller Settings - Servo, Calibrated Reflow or Ramsey Valve
    • Rate Error Alarm Threshold
  • Direct Injection
    • Direct Injection Configuration Setup
    • Direct Injection Controller Settings
    • Priming an Injection Pump
    • Calibrating an Injection Pump
    • Injection Diagnostics
  • Spinner Spreader Granular Control
    • Spinner Spreader Control Configuration
    • Spinner Spreader Controller Settings
    • Controller Settings - Spinner Spreader
      • Controller Settings - PWM
      • Controller Settings - Servo
    • Fan Settings
    • Conveyor Rate and Product Density Look-Up
  • NORAC UC5 Setup
    • Norac UC5 Setup Screen
    • Automatic Setup
    • Retune
    • Minimum Height Settings
    • Norac UC5 Run Time Environment
    • Boom Height Screen
      • Engage button
    • Boom Height Control Options
  • Troubleshooting
    • Troubleshooting DirectCommand Liquid Applications
    • Troubleshooting Direct Injection Configurations
    • Direct Injection: Pump Doesn’t Run
  • Battery Power Pin-Outs
    • Direct Injection: Pump Runs Full Speed
    • Direct Injection: Application Error
    • Direct Injection: Discharge Flow Sensor Error
  • Discharge Flow Sensor Pin Outs
    • Direct Injection: Inlet Restriction
  • VACUUM SWITCH PIN OUTS
    • Troubleshooting DirectCommand Granular Applications
    • Troubleshooting Serial Control Applications (Liquid and Granular)
    • Troubleshooting Serial Control Applications (Liquid Only)
    • Troubleshooting Serial Control Applications (Granular Only)
  • Miscellaneous
    • Glossary of Application Settings
    • Configuration Settings
    • Speed Input Settings
    • Automatic Swath Control Settings
    • Auxiliary Input Settings
    • Controller Settings
    • Controller Settings: Direct Injection Pump Calibration
      • Pump Calibration Setting
      • Rate Response Warning
      • Flow Monitor Warning
    • Run Screen
  • Diagnostics
    • Input Diagnostics
• Harvest
  • Run Time Environment: Map Screen
    • Map Screen: Zoom to Extent
    • Map Screen: Zoom Detail
    • Harvest Button on Task Bar
    • Map Screen: Flow Delay
  • Run Time Environment: Harvest Screen
    • Harvest Screen Display Items
    • Harvest Screen - Active Display Items
  • Harvest Setup Tabs
  • Create a Harvest Configuration
    • Configuration Settings
    • Primary and Backup Speed Source
    • Calibrate Distance
  • Combine Tab
    • Combine Settings
    • Advanced Combine Settings
    • Map Delays
    • GPS Offsets
      • Antenna Offsets
      • Head Offset
  • Header Tab
    • Header Settings
    • Calibrate Header Sensor
    • Header Offset
  • Crops Tab
    • Crop Settings
  • Calibration Tab
    • Pre-Harvest Checklist
    • Calibration Sequence
    • Vibration Calibration
    • Temperature Calibration
    • Moisture Calibration
    • Grain Weight Calibration
    • Adding a New Calibration
  • Diagnostics
• Appendix
  • “Company Warranty Statement” on page 186System Diagrams Reference
  • File Formats
    • Prescription Map File Types
    • Boundary and Guideline File Types
    • System File Types
  • Module LED Diagnostic States
    • LED display
  • Company Warranty Statement
  • WARRANTY
  • PROPRIETARY TECHNOLOGY NOTICE
  • COPYRIGHT NOTICE
  • SERVICE AND SUPPORT
  • Index