Ag Leader InSight Ver.8.0 Users Manual - Manual (Page 126)

112
Controller Settings - Auxiliary Tab
The Auxiliary Tab of the Controller Settings window
adjusts the minimum speed, rate threshold and rate time
of the motion detection sensor that turns the Hydraulic
Drive on.
• Min Ground Speed
The Minimum Ground Speed performs two functions: It
determines the speed at which the motion detection sensor
disengages and actual ground speed is used for rate control;
and also determines the target seed meter RPM when the
motion detection sensor is active.
Note: Planter operators should set this to 2.0 mph.
• Rate Threshold
The percentage of seed rate error that triggers the Hydraulic Seed Control alarms.
• Rate Not Responding Time
The amount of time that the error occurs before the alarm sounds.
Great Plains
Mechanical: Standard 12 110 120 102
Mechanical: Twin Row 6 100 135
Planter Brand and Type Corn Soybeans
Cotton
Standard
Rate
Sorghum