Ag Leader GPS 2500/2500B Operators Manual - Manual (Page 27)

21
GPS 2500/2500B S
MART
A
NTENNA
O
PERATING
THE
B
AS
E
S
TA
T
IO
N
Setting to an Average of Positions
The GPS 2500B re-averages its position for 5 minutes (300 seconds) and assigns this new position to its
permanent reference coordinates.
1. On the Top menu, select Base Station > Reference > FixedLoc.
2. Use the Up Arrow or Down Arrow button to change the value from No to Yes
and then press Enter.
3. Scroll to and select Re-Average Pos. The screen changes to show the Time
To Go and the GPS 2500B counts down from 300 seconds to zero, after which
Time To Go changes to Converged (if the unit converges on the coordinates).
S
ETTING AS A
P
ORTABLE
B
ASE
S
TATION
To set the GPS 2500B as a portable base station:
1. On the Top menu, select Base Station > Reference > FixedLoc.
2. Use the Up Arrow or Down Arrow button to change the value from Yes to No
and then press Enter.
Setting an Alternate Reference Point
To set an alternate reference point
1. On the Top menu, select Base Station > Reference > Set New Reference >
Enter New.
NOTE
You should only use this option after the GPS 2500B is installed.