Ag Leader GPS 2500/2500B Operators Manual - Manual (Page 28)

22
2. Enter the desired coordinates.
M
ANAGING
C
ONFIGURATIONS
The GPS 2500B Configuration Wizard allows you to:
• Save a configuration
• Return to a saved configuration
• Delete a saved configuration
S
AVING A
C
ONFIGURATION
To save a configuration:
1. On the Top menu, select Config Wizard > Proceed Wizard > Create New.
2. Select Enter Name, use the Up Arrow and Down Arrow buttons to enter a
name, then press Enter.
3. Scroll to and select Save to Location.
4. Scroll to the desired location (such as Not Used1) and press Enter to save.
R
ETURNING TO A
S
AVED
C
ONFIGURATION
To return to a saved configuration:
1. On the Top menu, select Config Wizard > Use Previous.
2. Scroll to the desired configuration and press Enter to select it.
D
ELETING A
S
AVED
C
ONFIGURATION
To delete a saved configuration:
1. On the Top menu, select Config Wizard > Delete Saved.