Gps 4100, Ag leader technology, General instructions – Ag Leader GPS 4100 Operators Manual User Manual
Page 18

General Instructions
GPS 4100
Ag Leader Technology
March 2001
16
NMEA Messages
The GPS unit uses Trimble TSIP to provide position information to the
PF3000. This means that NMEA messages (Figure 15) do not need to be
set and will not be displayed on the NMEA diagnostic screen.
NMEA MESSAGES
GGA
ON
GLL
OFF
VTG
ON
GSV
OFF
GSA
OFF
ZDA
OFF
ALM
OFF
RMC
OFF
MSS
ON
EDIT
EXIT
Figure 15. NMEA Messages Screen
GPS/Port
Configuration
The GPS/Port Configuration screen (Figure 14) requires no
adjustment at this time. This screen will be used for future options
for the AUX Port of the GPS.
GPS/PORT CONFIGURATION
Position Rate
1 Hz
NEMA Output rate
ASAP
AUX port parity
NONE
P/v FILTER
ON
Port
AUX
Output baud rate
19200
Output type
NMEA
Input baud rate
19200
Input type
None
EDIT
EXIT
Figure 16. GPS/ Port Configuration Setup Screen