Ag Leader EZ-Guide Plus Getting Started Guide - Manual (Page 35)

EZ-Guide Plus Lightbar Guidance System Getting Started Guide Getting Guidance 33
Deleting all AB Lines
1. Select 9 to enter the Guidance Pattern screen.
2. Select Delete All AB’s. The Warning screen appears.
3. Select Yes to delete all AB Lines. The Guidance
Pattern screen appears.
4. Select a new field pattern to create and then press
o .
5. Set the swath width and implement width.
6. Select Exit and then press o .
The main screen appears.
Nudge
Nudging moves the guidance line back to the correct path. Nudge a guidance line if
you need to correct for:
• GPS position drift when returning to the field for guidance, for example after
pausing or turning the unit off and on
• GPS satellite constellation changes while driving in the field
Nudge is always applied to the guidance line relative to the vehicle heading. To nudge,
select
1
or
3
from the action icons.
The default nudge increment value is 0.02 m (0' 1"). To change the amount by which
nudge increases:
1. Select Guidance / Nudge Increment. The Nudge
Increment screen appears.
2. Press u or D to select the required nudge increment
and then press o .
On the ground – Vehicle on On screen – Vehicle offline.
line with current swath/row. Nudge left to correct.