Ag Leader EZ-Guide Plus Getting Started Guide User Manual
Page 49
EZ-Guide Plus Lightbar Guidance System Getting Started Guide
Using GPS 47
To configure the system for use with EGNOS:
1.
Select GPS / Corrections. The EZ-Guide Plus screen
appears.
2.
Select Edit and then press
o
.
The Edit screen appears.
3.
Select Edit EGNOS and then press
o
.
The EGNOS screen appears.
4.
Select the appropriate setting for each satellite. See
the table on page 46.
The default EGNOS settings are:
XP/HP options
If you have a high accuracy smart antenna and are using
XP/HP corrections, you can enable the following options:
•
Autoseed™ fast restart technology - enables faster
XP/HP convergence if the vehicle has not moved since
power was turned off
•
VBS Backup - enables the use of VBS corrections if
XP/HP corrections are lost
Subscriptions
The OmniSTAR corrections (VBS, HP, and XP) are
subscription services, which are automatically configured.
To view your subscription information, select GPS /
Subscription.
Satellite
Default
Description
AOR-E
Heed Hlth
Operational
IOR
Off
Test signal
IOR-W
Heed Hlth
Operational
ARTEMIS
Off
Test signal