Ag Leader GeoSteer RTK 900 MHz Installation Manual - Manual (Page 4)

4 GS-900 Radio Kit Installation Instructions
Overview
The GS-900 Radio Modem provided a RTK radio link between the GeoSteer system on the rover and a local Base Station
transmitting on the same channel. This manual provides the instructions for installing the GS-900 Radio Kit onto the GeoDock
of the GeoSteer system. Follow the instructions provided to install this kit.
Procedure
1. Remove the black, plastic plug from rear of the GeoDock
assembly with a flat screwdriver.
2. Remove outer steel threaded ring from the RF Radio NMO
10"cable (PN 201-0537-01).
Note: There is an o-ring on the bottom side of the steel
ring. Verify that the o-ring is not lost.