Ag Leader SMS Mobile Sensors Quick Start Guide - Manual (Page 11)

SMS Mobile Sensor Configuration and Logging Options
Revision 8/1/2013
© 2013 Ag Leader Technology, Inc All Rights Reserved 10
Connecting a Geonics Sensor to SMS Mobile
[Back to Top]
1. Connect the Geonics Sensor to the Mesa,
PC or handheld device with the serial cable
to the 9-pin serial port.
2. Open the SMS Mobile Software.
3. Tap the Setup menu and then the
Sensors icon.
Photo courtesy of Geonics, Inc.
4. In the Available Sensor Configurations window tap Add.