Ag Leader SMS Mobile Sensors Quick Start Guide - Manual (Page 29)

SMS Mobile Sensor Configuration and Logging Options
Revision 8/1/2013
© 2013 Ag Leader Technology, Inc All Rights Reserved 28
10. Tap Test Sensor.
a. Tap OK after verifying the Veris Monitor is turned on. In order to test the Veris
Display, you will need to be traveling more than .08 miles per hour and have a
GPS fix.
b. Once testing is complete you should receive a message indicating that
messages have been received from the sensor and that it is connected.
c. Tap OK.
11. Select the Attributes you wish to log from the sensor by placing a check mark in the
box next to their name. Tap OK when finished.