ididit Retrofit Steering Column: 1965 Falcon - Manual (Page 6)

WIRING INSTALLATION
We find the following tasks are much easier to do on a workbench before
installing the column into your car.
New male and female
connectors with terminals
are included with your new
ididit steering column. You
may use these new connectors
with your wiring or you can
use the original connectors.
The terminal pins in the new
connectors are the same size
as the original. If you have an aftermarket harness the new ones may be
helpful for a clean installation. (Figure 7)
If you are using the OEM connectors see the diagram below for the correct
color pin out on your column. (Figure 8)
Figure 7
4
Figure 8
WIRE SIDE
Steering column plugs