ididit Retrofit Steering Column: 1967-72 Ford Truck - Manual (Page 7)

5
Wheel Installation:
Make sure your road wheels are
pointing straight forward and
your column and all mounts are
completely secure. Next install your
OEM wheel with all of the original
components or add an aftermarket
wheel with an adaptor. Slide the
wheel on top of the splined top
shaft of the column. You may need
to adjust your wheel a little to fit into
the splines. Place wheel nut on top of wheel and torque wheel nut to
35lbs.
Final Check:
Test the electrical system (KEY ON)
1.) Turn Key on and test turn signals for function and to verify they
cancel when turning the wheel.
2.) Test the brake lights by depressing the brake pedal.
3.) Test the horn
Your installation is now complete!
Knobs & Levers:
After removing all items from the package, as-
semble the knobs onto the levers. The tilt lever
(shorter of the two levers) goes on the left side
of the column in the hole closest to the dash.
The column has a threaded hole that this lever
threads into.
The turn signal lever (longer of the two
levers) goes on the left side of the column in
the hole closest to the driver. The column has a
threaded hole that this lever threads into.