ididit Retrofit Steering Column: 1973 Chrysler B-Body - Manual (Page 7)

5
Knobs and levers:
Tilt Lever:
After removing all items from the package,
assemble the knobs onto the levers. The tilt
lever goes on the left side of the column in the
hole closest to the dash. The column has a
threaded hole that this lever threads into. We
recommend using Locktite.
Emergency Flasher:
The Emergency flasher is threaded into the
hole located on the right side of the column. You
will noticed the plastic portion that the flasher
screws into is flush with the outer surface when
the flashers are in the off position. It is easy to
accidently turn the flashers ON while installing
which could lead to problems later. Check to
make sure the flashers are in the OFF position
before continuing.
Turn Signal Lever:
A screw is provided with the Dress-up kit.
This screw with secure the turn signal
lever to the column. PLEASE NOTE there
are two holes on the turn signal switch.
One D shaped and the other is round.
The screw is to be inserted in the round
hole! Use a #2 Phillips screw driver to
tighten this screw tightly. It holds the lever
and the switch half’s together.