ididit Retrofit Steering Column: 1973 Chrysler B-Body - Manual (Page 8)

Column Electrical:
OK, this is easy… the bag with the Dress
up Kit also contained a black wiring plug
adaptor. This should simply plug into the
column on the wide plug and then into the
OEM plug from under the dash. (Figure 15)
Ignition Electrical:
Please see pack “B” for wiring instructions.
Note: There are up to 3 wires
on the ignition plug that may
not have a mate. These wires
were for key buzzer and shift
indicator. The wiring of the
ididit column does not support
these features. The wires
are insulated and should be
protected in the connector.
(Figure 16)
Securing your wires:
Now with all of the electrical connections attached the Relay pack
needs to be secured up and out of the way of the pedals. Be
especially careful of the Throttle Cable. When prototyping this
column we secured the wires between the column dash mount and
the fuse panel up and out of the way from everything.
Note: We provided mounting tabs on the Relays. These mounting
tabs are not necessary, but they are handy if you can use them.
Reconnect the battery terminals to the battery.
(Figure 15)
(Figure 16)
6