Innovate Motorsports TC-4 - Manual (Page 8)

- 8 -
5.3 16-Channel Log-Chain example
The example chain consists of a LM-1/LMA-2, a LC-1, a TC-4, a LMA-3 and 2 XD-1’s. In this
case the chain has 16 channels (6 from LM-1, 1 from LC-1, 4 from the TC-4 and 5 from the LMA-
3).
Devices attached to the LM-1’s analog input count as being part of the LM-1’s 6 channels. They
don’t count extra. XD-1’s do not contribute any channels, so you can add as many as needed.
6. Programming the TC-4 with LM Programmer
To connect the TC-4 for programming follow these steps:
1. Disconnect any MTS device from the IN port.
2. Connect the 2.5mm to DB 2 computer interface cable into the Serial OUT port. Your
computer needs a serial port. If it does not have one, you will need a USB to serial
adapter.
3. Power the TC-4 either from 12V or a 9V Battery (when using a desktop computer).
4. Start the LM Programmer application
The following screen will show up: