Nitrous Express CARBURETOR PLATE SYSTEMS - Manual

1
NITROUS EXPRESS CARBURETOR PLATE SYSTEMS INSTRUCTIONS
READ…UNDERSTAND…AND…FOLLOW…these instructions. If there is something you don’t understand,
STOP! Call the N X tech department for help. 9:00 AM to 5:00 PM CST 940-767-7694. The installation
procedures are divided i nto 5 sections.
Please pay particular attention to each one:
1. Mounting the bottle.
2. Mounting the nitrous plate
3. Plumbing the fuel system.
4. Wiring the system
5. Testing the system
Before starting any installation steps:
1. Disconnect the negative battery terminal.
2. Never use Teflon tape on any system fittings. Tape debris will cause numerous problems ranging from
clogged solenoids to blocked jets. Use the red liquid thread sealer furnished with your NX system. A drop
is all it takes.
3. Have your nitrous bottle filled by a reliable source, being sure it is filled to capacity with FILTERED
“Nytrous +” nitrous oxide.