Nitrous Express Switch Panel installation User Manual

Nitrous Express For the car

background image


Switch Panel installation Instructions

1. Pick out the name plates you would like to use and attach them to the switches. The

name plates have a small notch that will align on the switch in order to stay in the correct
location at all times.

2. Push the name plate firmly up on to the switch.
3. Once you have the name plates on the switches you can install the switches into the

switch panel in any order you choose. The Switch panel also has a notch that the switch
will slide into to keep the switch from turning.

4. To wire the switches follow these diagrams: