Nitrous Express Switch Panel installation - Manual (Page 2)

2
For the Chevrolet pickups/SUV’s you will need to remove the dash bezel to install the
switch panel.
1. Set the parking brake.
2. Move the column shift lever (on Automatic transmission vehicles) into D1.
3. Pull the dash bezel from the corner and the bezel should pop loose, it is best to
remove the bezel completely for now.
4. Once the dash is removed unclip the small storage compartment, this will be replaced
with the switch panel.
5. Place switch panel where the small compartment was.
6. Reinstall dash bezel.