PowerTap Cervo 2.4 Pro - Manual (Page 11)

SCROLLING MENU:
Find: If [MODE] and [SELECT] are released
When “Find” is displayed the computer will find
Search for the PowerTap hub.
clr: If [MODE] and [SELECT] are released when
clr is displayed ALL DATA WILL BE ERASED.
SEt: If [MODE] and [SELECT] are released
When SEt is displayed on the top level of the
Screen, a flashing “E”, d and t on the middle
Level and 12345 on the bottom level.
E= exit, return to ride mode
d= restore default settings
T= test mode
1 2 3 4 5 = setup menus
11
4) Hold [MODE] and [SELECT] = simultaneously press and hold both [MODE]
and [SELECT] for 2 sec. NOTE: Continuing to hold longer than 2 sec. will clear
all data.
5) Extended Hold [MODE] and [SELECT] = simultaneously press and hold of
both [MODE] and [SELECT] for greater than 5 sec.
DISPLAY MODES
The computer has two (2) main modes of operation:
1) Trip
2) Interval
Hold [MODE] to toggle between display modes.
POWER CONSERVATION
The computer has power saving features to prolong battery life. The computer powers
down the display after four (4) minutes of inactivity. Press either [MODE] or [SELECT]
to activate the display.