PowerTap Cervo 2.4 Pro - Manual (Page 25)

PR
3
0 s
YES
AV WATTS
POWERTAP Only
PR
0 s
AV MI
YES
PR
3
0 s
YES
PR
3
t
YES
POWERTAP Only
25
COMPUTER SETUP 3
This setup menu includes: zero readings for power, speed, and cadence. NOTE: You
are unable to move back to a previously viewed setting. You must restart setup 3 to
make corrections. NOTE: These settings are useful for determining you average when
pedaling only and do not effect the data that is stored for download.
1) Press [SELECT] to toggle between yes and no for zeros included
in average of watts. Press [MODE] to save. This setting only applies
when a PowerTap hub is installed.
2) Press [SELECT] to toggle between yes and no for zeros included
in average of speed. Press [MODE] to save.
3) Press [SELECT] to toggle between yes and no for zeros included
in average of cadence. Press [MODE] to save. This setting only
applies to the Cervo2.4 Pro model.
4) Press [SELECT] to toggle between yes and no for auto-zero func-
tion. Normally leave at yes. NOTE: Auto-zero is used for track bike
use where large negative torque may be present. Hub modifica-
tion to fixed hear is necessary. This setting only applies when a
PowerTap hub is installed.