PowerTap Cervo 2.4 Pro User Manual
Page 17
INTERVAL MODE
The computer has two display modes. The trip mode shows total
trip metrics, and the interval mode displays interval specific infor-
mation. The interval mode functions as a lap marker and is essen-
tially always on.
To begin the first interval, or advance to the next interval:
Press and release
[MODE] and [SELECT] simultaneously. NOTE: Do
not hold both buttons down as you will clear all data from the
computer.
In trip mode “INT” and the new interval number will appear and disappear
(FIGURE
19)
. The computer can mark an unlimited number of intervals although after nine (9)
the marker will begin to count back at one (1). For example, interval ten (10) is dis-
played following interval (9) as one (1).
To view interval specific data (power, speed, and multi-function display)
from any loca-
tion on the display:
1) Hold [MODE] until “INT” appears on the left hand side of the display. The “INT” and
interval number will remain illumined as a forth line in the main display (FIGURE 19).
The data displayed is that of the current interval number shown.
2)To exit back out of interval mode hold [MODE] until “INT” disappears.
heart rate
speed
int
multi
17