PowerTap Cervo 2.4 Pro - Manual (Page 7)

SYSTEM INSTALLATION
1. Attach Sensor to Fork
Attach sensor to front fork so the magnet passes
within 3-5 inches of the sensor (FIGURE1). Place
cable tie through sensor to secure. Make sure the
logo side of the sensor faces the magnet.
3. Attach Computer Shoe to Handlebar or Stem
The receiver shoe can be mounted on either the handlebar or stem. Secure the
mounting base with cable ties. Slide the computer shoe in the direction of the arrow
as depicted in either FIGURE 2A or 2B depending on mounting location.
SPOKE
1/2”
(12.7 MM)
MAX
FORK
SPOKE MAGNET
SPEED SENSOR
Computer Shoe
Mounting Base
Arrow
Slide shoe in direction of arrow onto the base. Slide shoe in direction of arrow onto the base.
2A. Attach Receiver mount to Handlebar 2B.Attach Receiver mount to Stem
Computer Shoe
Mounting Base
Arrow
7