PowerTap Cervo 2.4 Pro - Manual (Page 24)

COMPUTER SETUP 2
This setup menu includes: rate of display for watts, speed, cadence, and heart rate.
NOTE: You are unable to move back to a previously viewed settings. You must restart
setup 2 to make corrections. NOTE: These settings do not effect the data stored for
download.
This function can be used to allow better pacing during time trial efforts. A greater
rate of display allows for a slower update of the display.
1) From the computer setup main menu press [SELECT] and scroll
until the number two (2) is flashing and press [MODE] to enter
setup mode.
2) Press [SELECT] to toggle through (1, 2, 3, 5 10, 30) rate of display
values in seconds for watts. Press [MODE] to save. This setting only
applies when a PowerTap hub is installed.
3) Press [SELECT] to toggle between (1, 2, 3, 5 10, 30) rate of display
values in seconds for speed. Press [MODE] to save.
4) Press [SELECT] to toggle between (1, 2, 3, 5 10, 30) rate of display
values in seconds for cadence. Press [MODE] to save. This setting
only applies to the Cervo2.4 Pro model.
Std
1
00000
OD
PR
2
3
AV MI
PR
2
5
C AV
POWERTAP Only
24