PowerTap Cervo 2.4 Pro - Manual (Page 20)

Std
t
1
Std
t
p
Std
p
t
12:0
20
COMPUTER SETUP 1
This setup menu includes: time of day, date, storage rate, wheel circumference, units
of measure, odometer. NOTE: You are unable to move back to a previously viewed set-
tings. You must restart setup 1 to make corrections.
1) From the computer setup main menu press [SELECT] and scroll
until the number one (1) is flashing. Press [MODE] to enter setup
mode.
2) Press [SELECT] to toggle between a 12 or 24 hour clock. Press
[MODE] to save.
3) Press [SELECT] to toggle between AM (A) or PM (P). Press
[MODE] to save.
4) Press [SELECT] to toggle through digit values to set hours in
time of day. Press [MODE] to save.