PowerTap Cervo 2.4 Pro - Manual (Page 29)

Maintenance & Specifications
COMPUTER BATTERIES
The Cervo2.4 computer batteries typically need to be
changed every 400 hours of use. The computer will says “low
bat” when the computer battery needs to be changed. This
message is displayed after a “clr” is performed. To replace
computer battery (Type CR2032), remove the computer from
the mount. Remove the battery cover on the back of the
computer (use a cone wrench to remove the battery cover),
exchange the battery, and replace the cover as shown below
(FIGURE 23).
TECHNICAL SPECIFICATIONS
Interval Data Storage
Unlimited
Interval Display 9 Intervals (internal recording)
Operational Temperature 0 to 40 degrees c or 32 to 104 f
Battery Life (Computer) 400 hours approx.
RANGE OF MEASUREMENT
Speed
2-59 mph (3-95 KPH)
Distance 0.00 to 9999.99 (Miles)
Trip Time 0.00.00-999.99 Minutes
Cadence 40-140 RPM
Total energy 0-99999 Kilojoules
Odometer 0-99999 Miles or Kilometers
Heart Rate 0-255 BPM (Beats per Minute)
29