Assembly instructions – Yetter 2984 Series Generation II Maverick Opener User Manual
Page 21
Advertising
21
ASSEMBLY INSTRUCTIONS
2984-005 – NOTCHED DISC SEALER KIT
2984-006 – 16” DISC SEALER KIT
STEP 5. Assemble the blades to the 2965-hub cap, 2965-128 hub and bearing assembly, 5/8” x 4” D-bolt
and 1.5” OD x 21/32” ID x 3/16” thick flat washer. Bolt the blade and hub assembly together using 4) 5/16”
x 1 ¼” carriage bolts and 5/16” lock nuts.
IMPORTANT: 2527-530 washer must be installed or blade and hub assembly will fall off during use.
NOTE: During assembly be sure to align the grease fitting hole in all the components to assure proper
lubrication of the bearing. Use a general purpose grease before use of the openers.
Advertising