Assembly instructions – Yetter 2984 Series Generation II Maverick Opener User Manual
Page 27
Advertising
27
ASSEMBLY INSTRUCTIONS
2984-009 – SEALING WHEEL KIT
STEP 1. Install 2) 2984-324 mount plates onto the R.H. and L.H. knife mounts using 4) ½” x 1 ½” bolts and
½” lock nuts.
NOTE: Use the lower front holes of the mount plate and the rear holes of the knife mounts.
STEP 2. Attach the 2984-323 sealer mount bracket to the mount plate on the rear set of holes using 4) ½”
x 1 ¼” bolts and ½” lock nuts.
Advertising