Assembly instructions – Yetter 2984 Series Generation II Maverick Opener User Manual
Page 29
Advertising
29
ASSEMBLY INSTRUCTIONS
2984-009 – SEALING WHEEL KIT
STEP 5. Attach the 2) 2570-750 4.5” X 16” wheels to the 2925-206 adjustment stem using 2) 5/8” x 4”
bolts, ¾” spacers, 5/8” lock washers and 5/8” hex nuts.
STEP 6. Insert the wheel/stem assembly into the wheel arm and hold it in position with the 2925-315 pin
and 1/8” hairpin cotter.
STEP 7. Tighten all hardware to the recommended torque setting unless otherwise stated.
Advertising